Skip to main content

Stock Control

In one sentence: Stock control is how ServCraft tracks the quantity of every item at every warehouse — recording every movement so you always know what you have, where it is, and where it went.


The Principle: Every Movement Is Recorded​

ServCraft uses a stock ledger approach: every time stock moves — in, out, or between locations — a transaction is recorded. This creates a complete audit trail. You can always see:

  • The current quantity at any warehouse
  • Every movement that changed that quantity
  • When it happened, who did it, and why

This is the same principle used by accounting systems, applied to physical inventory.


Stock Quantities Explained​

For each inventory item at each warehouse, the system tracks four quantities:

QuantityWhat It MeansExample
On HandTotal physical units at this location right now10 filters
In ProgressAllocated to jobs that are underway, not yet consumed3 filters allocated to Job #124
AvailableOn Hand minus In Progress — free to allocate7 filters
FaultyDamaged units — present but unusable1 damaged filter

The key number for daily operations is Available. If you have 10 units on hand but 9 are allocated to jobs in progress, you only have 1 available for a new job.

Available = On Hand − In Progress

Stock Transaction Types​

Every change to stock levels is recorded as a stock transaction. The system supports these types:

TypeWhat HappensExample
GRVStock comes in from a supplierReceive 50 filters from ABC Supplies
TransferStock moves between your warehousesMove 10 filters from Main Store to John's Van
AdjustmentCorrect a discrepancyStocktake found 8 units, system showed 10 → adjust down by 2
InitialFirst-time setup of stock levelsLoad 20 filters into system when going live
UsedStock consumed by a job/invoiceJob uses 2 filters → stock decreases by 2
ReturnStock comes back after an approved invoice is reverted to draft or cancelledInvoice for 2 filters is cancelled → 2 filters back in the warehouse
External TransferStock goes outside your companySend faulty item back to a supplier for warranty repairs
GenericA stock quantity change with no supporting documentDirect edit of stock levels

Every transaction moves through a simple status flow: Draft → Complete (or Cancelled). Stock levels only change when the transaction is completed, and a completed or cancelled transaction becomes read-only.


How Stock Flows Through a Job​

The most common stock movement in a field service business:

[Supplier] → GRV → [Warehouse Stock]
↓
Job Starts (Work In Progress): Stock Allocated
↓
Materials Marked as Used: Stock Used
↓
[Customer] ← Invoice

Step 1: Stock Allocated (In Progress)​

Materials are added to the job, each drawing from a chosen warehouse. When the job moves into a Work In Progress status, the system moves the outstanding quantities from Available to In Progress. The stock is still physically in the warehouse but is earmarked for this job.

  • On Hand: 10
  • In Progress: 3 (for Job #124)
  • Available: 7

Step 2: Work Performed​

The technician does the job and uses the items. On the mobile app, they can log exactly what was used (which may differ slightly from what was planned).

Step 3: Used / Consumed​

The materials are consumed when they are marked as used, and a "Used" stock transaction permanently removes them from the warehouse. That happens in one of three ways:

  • The job moves to a status with Mark Materials as Used ticked in Settings → Jobs → Statuses (shown as Uses Materials in the status list). Ticking Close Job on a status ticks Mark Materials as Used as well, but it can be unticked again.
  • An invoice linked to the job is approved, which moves it from Draft to Unpaid. An invoice created already Unpaid deducts in the same way. The invoice deducts the stock on its lines, and the job's materials count as used only when the invoice is linked to the job.
  • The job is closed while the job preference Manually closing a job will mark materials as used is on. On the web the user is asked "Mark materials as used?" and can decline. From the mobile app the materials are marked without a question.

The stock ledger records the movement with a link to the job or invoice.

  • On Hand: 7 (went from 10 → 7 after consuming 3)
  • In Progress: 0
  • Available: 7

When a status or a job close marks the remaining materials as used, ServCraft first subtracts everything already taken off the warehouse for that job. That covers Used transactions linked to the job and Used transactions from its Unpaid, Paid or Overdue invoices, less any Returns. Only the difference is deducted.

Step 4: Return (if applicable)​

A Return stock transaction is created only when an approved invoice is reverted to draft or cancelled. It puts that invoice's used stock back in the warehouse and lowers the linked job's Used quantity. Materials marked as used by a job status or by closing the job cannot be returned from the job, and reopening the job does not return them. Correct the count with a stock adjustment instead.


Stock Adjustments​

When stock on hand doesn't match what the system says (due to damage, loss, miscounting, etc.), a manual adjustment corrects it.

When to adjust:​

  • After a stocktake finds a discrepancy (see Stocktakes)
  • A product is damaged in the warehouse
  • Items are discovered missing (theft or loss)
  • A data entry error needs correcting

To create an adjustment:​

  1. Go to the Transactions tab on the Inventory screen and create a new Adjustment (adjustments can also be started from stock views)
  2. Select the Warehouse
  3. Optionally select the Person Responsible
  4. Add the inventory items and enter the Adjust By quantity for each (positive to increase, negative to decrease) — the current quantity on hand is shown alongside
  5. Add a comment explaining the adjustment (optional, but strongly recommended)
  6. Complete the adjustment — stock levels change only on completion

Note: A pick-a-reason list (Damaged Goods, Theft, Miscounted, etc.) applies to stocktake adjustments — see Stocktakes. Manual adjustments use the comments field instead.

⚠️ Adjustment permission required. Not all staff can make adjustments. The Warehouse Stock – Adjustment permission controls this. Restrict it to warehouse managers and senior staff.


Stock Transfers Between Warehouses​

Moving stock from one warehouse to another — without a job or sale — is a stock transfer.

Common reasons:

  • Replenish a technician's van from the main warehouse
  • Redistribute stock from an over-stocked branch to an under-stocked one
  • Consolidate slow-moving items before a stocktake

Process:​

  1. Go to the Transactions tab on the Inventory screen and create a new Transfer (a van's page also has transfer in/out shortcuts)
  2. Select Source Warehouse (where stock is now)
  3. Select Destination Warehouse (where it's going)
  4. Select the Person Responsible — required for transfers
  5. Add the items and quantities — the quantity at the source is shown alongside
  6. Complete the transfer

The source warehouse decreases; the destination warehouse increases. Total stock in the system stays the same.

Permission: transfers require the Warehouse Stock – Stock Transfer permission.


Keeping an Eye on Stock Levels​

  • Review the Stock tab on the Inventory screen regularly — it shows quantities per warehouse
  • Agree internal minimum levels with your warehouse manager based on usage rates and supplier lead times
  • Raise purchase orders when fast-moving items run low — see Purchase Orders & GRV

Viewing Stock Levels​

For a specific item:​

Open the inventory item → click the Stock tab. This shows the quantity on hand, reserved, and available at every warehouse.

For a specific warehouse:​

Open the warehouse → the stock list shows all items and their quantities at that location.

From the inventory list:​

The inventory list shows a summary quantity (total across all warehouses).


Stock Transaction History​

Every inventory item has a Stock Transaction History — a full ledger of every movement:

  • Date and time
  • Transaction type (GRV, Transfer, Adjustment, Used, etc.)
  • Quantity moved (positive = in, negative = out)
  • The warehouse involved
  • Who performed the transaction
  • A link to the related document (GRV number, job number, invoice number, etc.)

This is invaluable for:

  • Investigating "where did that stock go?"
  • Auditing for accounting purposes
  • Investigating theft or loss

Access it from the Transactions and Transaction Detail tabs on the Inventory screen (viewing them requires the Warehouse Stock – View Stock Transactions permission), or from an individual item's stock history.


Common Scenarios​

"Our system shows 15 units but we only have 12 on the shelf"​

Create a downward adjustment of -3 and record what happened (e.g. miscounted, administration error) in the comments field, or investigate first (could be theft).

"A technician used more parts than expected on a job — how do we update the stock?"​

When the job is invoiced with the correct quantities, the stock will be consumed correctly. If the job is already invoiced, a manual stock adjustment may be needed.

"Stock went negative — how?"​

This can happen if invoicing happened before stock was properly received, or if adjustments were processed in the wrong order. Review the transaction history to find where the error occurred.

"We want to see which jobs used a specific item over the last 3 months"​

Check the Stock Transaction History on that inventory item. Filter by "Used" transaction type and the date range.

"We want to transfer items from Cape Town to Johannesburg"​

Use a standard Transfer — it moves stock between any two of your own warehouses, whether they're at the same branch or different branches. External Transfer is only for stock leaving the company entirely, e.g. a faulty item sent back to a supplier for warranty repairs.