Skip to main content

Stocktakes

In one sentence: A stocktake is a physical count of your warehouse stock to verify that what the system says matches what's actually on the shelf — and to correct any differences.


Why Do a Stocktake?​

Over time, the system's stock quantities drift away from reality due to:

  • Items used but not recorded in the system
  • Damage or spoilage not logged
  • Theft or loss
  • Data entry errors
  • Items put in the wrong warehouse

A stocktake finds these discrepancies and corrects them — keeping your inventory data trustworthy.

Recommended frequency:

  • At minimum: annually (usually at financial year-end)
  • Best practice: quarterly per warehouse, more often for high-value or high-turnover items
  • For technician vans: monthly or per job cycle

The Stocktake Lifecycle​

A stocktake moves through six stages:

StatusWhat's Happening
DraftBeing set up — not yet started
PendingReady to begin counting — waiting for staff to start
CountingActive count in progress
Counting CompletePhysical count finished — results being reviewed
CompleteAdjustments applied — stock levels updated
CancelledAbandoned — no changes made

Two Types of Stocktake​

TypeHow It WorksBest For
TemplatedUses a pre-defined list of items to countRegular counts of known items
Open CaptureCount anything — staff can add items on the flyFull warehouse sweeps, unknown items

Templated stocktakes are faster and more structured — you build a template of items that are regularly counted, and each stocktake uses that list as the starting point.

Open capture stocktakes are flexible — counters can scan or add any item they find. Better for a full physical inventory of a warehouse you haven't counted before.


The Full Stocktake Workflow​

Step 1: Create the Stocktake​

Only users with the Stock Take Manager permission can create stocktakes. (Staff without it only see stocktakes assigned to them.)

  1. Go to Inventory → Stock Takes (or Stock Take in the main menu)
  2. Click New Stock Take
  3. Give the stocktake a Name
  4. Select the Warehouse to count
  5. Select the Assigned Manager (must hold the Stock Take Manager permission) and the Assigned Capturer (staff member doing the counting)
  6. Set the Scheduled Start Date
  7. Choose the stocktake type (Templated or Open Capture)
  8. If Templated: select the item template to use
  9. Set the Validity Period in hours — how long the count is valid (defaults to 48 hours)
  10. Save — the stocktake moves to Pending

Step 2: Perform the Count​

The assigned counter (capturer) does the physical count:

On the web app:

  1. Open the stocktake and start counting — the status changes to Counting
  2. At this moment the system takes a snapshot of the expected quantity for every item on the list (and pre-populates the item list from the template if needed)
  3. For each item in the list:
    • Count the physical units
    • Enter the counted quantity
  4. Items show their expected quantity alongside the count field
  5. Mark each item as Counted

Note: Counted quantities can only be captured while the stocktake is in Counting status.

On the mobile app:

  1. Open the mobile app → Stock Takes, or tap the stocktake under Upcoming Stock Takes on the Home screen
  2. Open the assigned stocktake and tap Start Counting (the button is disabled with the message "Cannot start stock take until your device is finished syncing with server." until the phone has sent its pending changes)
  3. Count each item and enter the quantity. Next saves the count and moves on, and Skip leaves the item uncounted for now
  4. Use the barcode button to scan an item, or the search field, filter and sort buttons to find it
  5. Once every item is counted, tap Complete Counting and confirm

The mobile app never shows the expected quantity, so every count is a blind count. The progress bar shows how many items are counted. Hide counted in the filter removes finished items from the list, and the filter can also narrow the list by category, subcategory and bin location.

On an open capture stocktake that is counting, a + button adds an item that is not on the list, picked from the inventory search. A scan in that picker selects the item automatically when exactly one item matches, and the scanner then reopens for the next item.

Tip: Don't look at the system quantity before counting. Count what you find, then compare. Looking at the system figure first can bias the count.

The Stock Takes menu entry only appears when the company has both the Stock Control and the Stock Take features switched on, and the user holds the Stock Take or Stock Take Manager permission. Users who are not stock take managers only see the stocktakes assigned to them. Counting is only possible between the scheduled start and the end of the validity period, and only for the assigned capturer or a stock take manager. Before the start the stocktake reads "Scheduled for" followed by the date and time, and after the validity period the list shows it as Expired.

The summary screen lists the counted, skipped and pending items with only the counted quantity or the word Skipped beside each. Complete Stock Take on that screen is disabled until every item is counted, so a skipped item has to be counted first. It moves the stocktake to Counting Complete. The manager then reviews the discrepancies and completes the stocktake on the web.


Step 3: Review Discrepancies​

Once counting is complete:

  1. Counter marks the stocktake as Counting Complete — the system only allows this once every item has been counted
  2. The manager reviews the results
  3. Items where Counted ≠ Expected are flagged as discrepancies
  4. For each discrepancy, record an Adjustment (if you don't, the system fills in the difference — counted minus expected — when you complete the stocktake):
FieldWhat to Enter
Adjustment QuantityHow much to increase or decrease
ReasonSelect from the list (see below)
CommentsAny notes (e.g., "3 units found behind shelving")

Adjustment reasons:

  • Damaged Goods — items are broken/unusable
  • Theft — items are missing and theft is suspected
  • Miscounted — the count itself was wrong
  • Misplaced — items are at a different location than recorded
  • Administration Error — a data entry mistake in the system

Step 4: Complete the Stocktake​

When all discrepancies have been reviewed and adjustments recorded:

  1. Manager clicks Complete Stocktake — the system blocks completion if any items are uncounted or any discrepancies are unhandled
  2. All adjustments are applied to the stock levels as a single Adjustment stock transaction (zero adjustments are skipped)
  3. Stock on hand at the warehouse updates to reflect the corrected quantities
  4. Stocktake status moves to Complete
  5. A full record of the count and all adjustments is preserved for audit purposes

⚠️ This action cannot be undone. Once complete, the stock levels change. Review adjustments carefully before completing.


Stocktake Templates​

A stocktake template is a saved list of inventory items that you count regularly. Instead of building the item list from scratch each time, you load the template.

Creating a Template:​

  1. Go to the Stock Take Templates tab on the Inventory screen
  2. Click New Template
  3. Give it a name (e.g., "Main Warehouse Monthly Count")
  4. Add the inventory items you want to count
  5. Save

Templates are reusable — the same template can be used for multiple stocktakes over time.


Mobile Stocktake (Technician Van)​

Technicians can stocktake their own van stock from the mobile app:

  1. Manager creates a stocktake assigned to the technician's warehouse and assigns the technician as capturer
  2. The stocktake shows under Upcoming Stock Takes on the technician's Home screen once it is Pending or Counting and scheduled within the next week (the three nearest are listed), and in the Stock Takes list. Tapping it opens the stocktake
  3. Technician counts van stock and completes counting from the app
  4. Manager reviews and completes from the web

This is ideal for monthly van checks — technicians can do it during downtime without needing to return to the office.


After the Stocktake — What Happens to Stock Levels?​

Adjustments from the stocktake are applied as stock adjustment transactions in the stock ledger. Each adjustment shows:

  • Date and time
  • Item adjusted
  • Warehouse
  • Quantity change (+ or -)
  • Reason
  • Who approved it
  • Link to the stocktake

This means there's always a traceable record of why stock levels changed, which is essential for accounting and audit purposes.


Common Questions​

"How do we handle stock that was added to the system after the stocktake started?"​

Expected quantities are snapshotted at the moment counting starts, so stock received afterwards will show up as a discrepancy. For open capture stocktakes, counters can add newly found items manually. Best practice: freeze stock movements (no GRVs, no transfers) while a stocktake is active.

"What if the counter made a mistake in the count?"​

Counted quantities can only be changed while the stocktake is in Counting status — the system rejects count changes in any other status. Correcting a count clears any adjustment already recorded against that item, so it must be reviewed again. Once the stocktake is Complete, you'd need to create a separate stock adjustment.

"We do multiple warehouses — do we create separate stocktakes?"​

Yes. Each stocktake is for one specific warehouse. Run separate stocktakes for each location.

"How long does a stocktake take?"​

Depends on warehouse size and item count. A technician van with 30–50 items might take 20–30 minutes. A main warehouse with 500+ items might take a full day with multiple counters.

"The stocktake shows a discrepancy but we're confident the system is right and the counter made an error"​

Set the reason as "Miscounted" and enter an adjustment of zero — this closes the discrepancy without changing the stock level. Add a comment explaining why.